Wind Tracker 7000 Series
INSTALLATION INSTRUCTIONS
For Products:
Wind Tracker™ Set 7000 Series Windsocks
Wind Tracker™ Pivotal Harness System 9003
PLEASE READ!
The new Wind Tracker™ 9003 has the same great dependability and toughness as before, but now comes with some impressive new improvements to the design and function. No tools are required for assembly. The Wind Tracker™ 9003 kit includes: (1) Direction Vane DV9001 w/ metal safety clip, (1) Pivotal Harness Plate, (1) Lexan crossbar, (2) harness cords, (1) fiberglass “flip-over” rod w/ plastic fastener clip (spare plastic clips are included), wind speed pocket charts and instructions.
Four Easy Installation Steps – No tools required:
Step One:
Attach the Directional Vane (DV9001) to the top .75″ mast of the Wonder Pole®. Use the palm of your hand to apply a downward pressure to seat the Directional Vane DV9001 onto the Wonder Pole®.
Step Two:
Slide the Lexan crossbar into and through the sleeve of the Wind Tracker™ Windsock with the harness cords exposed at each end (see illustration to the left).
Next, attach the Wind Tracker™ Windsock to the pivotal harness plate with the harness cords using a simple over hand knot. Tie the knot as close to the end of the cord as possible (see illustration to the right).
Step Three:
Insert the 14” fiberglass “Flip Over” rod into the channel on the pivotal harness plate and secure with the small white clip (see illustration to the left).
Place the clip over and onto the end of the “flip-over” rod. (extra plastic clips are provided, only one is needed).
Be sure the rod is on the top of the Wind Tracker or the flip over protection will not work.
Step Four:
Snap the assembled Wind Tracker ™ (channel for flip “over-rod” faces up) onto the DV9001 post and install metal safety clip (see illustration to the left).
When complete, your wind Tracker Windsock System should look like the image to the right. You can unsnap the pivotal harness plate or remove the DV9001 if you need to make any corrections.
PLEASE READ – When replacing your Wind Tracker do not discard the Wind Tracker crossbar, you will need this for future replacements.
END